Attitude Custom Painting GALLERY

 

Random image

04 before

Album info

  • Title: March 2011
  • Description: Well, bought a good used drivers door. VERY little rust on it, and very straight. Found it from a local source.

    Stripped it and had it primed in one day. Got it hung. Looks good. Hopefully if all goes good, I will have the cab painted this month.



    Got the 3000 cfm Flex-a-Lite fan installed. Works great. Did that at the end of Feb.



    The rear is getting rebuilt right now. 4:10 gears. New ring an pinion, new Auburn posi. New 5x5 axles, new bearings, 1350 series yoke...

    Hope to have that installed by the end of next week
  • Owner: ACP Admin

Popular tags

Dynamic Albums

March 2011

  • 20-paint

  • 21-painted-outside

  • 22-painted-outside

  • 23-painted-outside

  • 24-painted-outside

  • 25-painted-outside

  • 26-bottom

    • 26-bottom
    • Views: 50
    • By: ACP Admin
      • Removed the remaining old undercoating. Looks like rust in the pic, but it is not.

  • 27-bottom

    • 27-bottom
    • Views: 51
    • By: ACP Admin
      • Sprayed it in a satin black

  • 28-bottom

  • 29-bottom

  • 30-bottom

    • 30-bottom
    • Views: 42
    • By: ACP Admin
      • While I got the cab tilted, I might as well sand the roof to get it ready for the 'flattening clear'

  • 31-bottom

    • 31-bottom
    • Views: 49
    • By: ACP Admin
      • This is the black fully dried and 'dulled' down the satin look

  • Last day to see the raw frame - 3/24/11

    • Last day to see…
    • Views: 42
    • By: ACP Admin
      • Last day to see the raw frame - 3/24/11 Note the custom made driveshaft 77 1/2 inches - 1350 u-joint...

  • 33-before cab mount1

  • 34-cab on frame1

    • 34-cab on frame…
    • Views: 39
    • By: ACP Admin
      • The cab is on the frame!!!!!!!!!!!!!! 3/26/11 6 months since I started this build!!!!!!

  • 35-cab on frame2

  • 37-scott fender guitar

    • 37-scott fender…
    • Views: 42
    • By: ACP Admin
      • The "infamous Fender Guitar" pic which started with my father in law (RIP-2005). Have to see if I ca...

  • 36-cab on frame Scott fender

  • 38-black-denim

  • 39-black-denim

    • 39-black-denim
    • Views: 48
    • By: ACP Admin
      • A good look at the satin black. Harley calls this Denim Black
Well, bought a good used drivers door. VERY little rust on it, and very straight. Found it from a local source.
Stripped it and had it primed in one day. Got it hung. Looks good. Hopefully if all goes good, I will have the cab painted this month.

Got the 3000 cfm Flex-a-Lite fan installed. Works great. Did that at the end of Feb.

The rear is getting rebuilt right now. 4:10 gears. New ring an pinion, new Auburn posi. New 5x5 axles, new bearings, 1350 series yoke...
Hope to have that installed by the end of next week